New 300-420 Practice Materials, 300-420 Latest Test Sample

What's more, part of that PrepAwayETE 300-420 dumps now are free: https://drive.google.com/open?id=1QDiXeZy55qNbZj1Pctv9J-HDGU2Y-e3x

Our website offer standard 300-420 practice questions that will play a big part in the certification exam. Valid 300-420 exam answers and questions are fully guaranteed and enough for you to clear test easily. Free demo of 300-420 Dumps PDF allowing you to try before you buy and one-year free update will be allowed after purchased. Please feel free to contact us if you have any questions about our dumps files.

Cisco 300-420 exam, also known as Designing Cisco Enterprise Networks (ENSLD), is a certification exam that validates the knowledge and skills required for designing enterprise networks. 300-420 exam is designed for network professionals who want to demonstrate their expertise in designing scalable, secure, and robust enterprise networks using Cisco technologies. The 300-420 exam is one of the core exams required for the Cisco Certified Network Professional (CCNP) Enterprise certification.

Cisco 300-420 (Designing Cisco Enterprise Networks) Certification Exam is designed for network professionals who wish to gain expertise in designing Cisco enterprise networks. 300-420 Exam focuses on testing the candidate's knowledge and skills related to designing, implementing, and troubleshooting complex enterprise networks using Cisco technologies. Designing Cisco Enterprise Networks certification exam is ideal for network architects, network designers, and network engineers who are responsible for designing and implementing enterprise networks using Cisco technologies.

>> New 300-420 Practice Materials <<

300-420 Latest Test Sample - Exam 300-420 Registration

We all have same experiences that some excellent people around us further their study and never stop their pace even though they have done great job in their surrounding environment. So it is of great importance to make yourself competitive as much as possible. Facing the 300-420 exam this time, your rooted stressful mind of the exam can be eliminated after getting help from our 300-420 practice materials. They do not let go even the tenuous points about the 300-420 exam as long as they are helpful and related to the exam. And let go those opaque technicalities which are useless and hard to understand, which means whether you are newbie or experienced exam candidate of this area, you can use our 300-420 real questions with ease.

Cisco 300-420 Exam is an excellent certification for network architects, network engineers, and other IT professionals who are interested in designing and implementing enterprise networks. It is a challenging exam that requires a deep understanding of enterprise network design principles and best practices. However, by passing the exam, you will demonstrate your expertise in enterprise network design, which will help you advance your career and open up new opportunities in the IT industry.

Cisco Designing Cisco Enterprise Networks Sample Questions (Q102-Q107):

NEW QUESTION # 102
An engineer is designing a QoS policy that queues excess packets for later transmission.
Which mechanism must be included in the design?

A. shaping
B. policing
C. RED
D. WRED

Answer: A

Explanation:
https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-policing/19645- policevsshape.html

NEW QUESTION # 103
A company has the following network infrastructure. (Refer to the exhibit.)

Router A is a GLBP active virtual gateway with priority level set to 250. Routers B and C are configured with the default GLPB configurations. The configuration of the active virtual gateway needs to be changed such that if the AVG fails, Router C should be elected to be used as an active virtual gateway. As the network administrator, you have been asked to make corresponding changes to the configuration.
Which command would you use for this purpose on Router C, and where would the command be configured?

A. glbp 10 priority 200 (on Router B)
B. glbp 10 preempt (on Router B)
C. glbp 10 priority 200 (on Router C)
D. glbp 10 preempt (on Router C)

Answer: C

Explanation:
You would configure the glbp 10 priority 200 command on Router C to change the configuration as required.
Gateway Load Balancing Protocol (GLBP) gateway priority determines the role that each GLBP gateway plays and what happens if the AVG fails. In the given scenario, Router A is used as an active virtual gateway. If the AVG in a LAN topology fails, an election process takes place to determine which backup virtual gateway should take over. When you configure this command on Router C, Router C will be elected when Router A fails as an AVG.
Once the configuration change is made, it can be verified by examining the output if the show run command as shown below:

In the above output, it can be determined that the glpb priority 200 command has been applied to the gigabitEthernet0/0 interface on Router
C. If the default priority of 100 had been applied, there would be no line in the output for priority. Because Router B is configured with the default configuration, it will have its priority set to the default level as 100.
You would not use the glbp 10 preempt command on Router B or the glbp 10 preempt command on Router C to change the configuration. You would use this command on a router to enable preemption. Preemption allows a virtual router that was once the AVG to assume its role as active virtual router when it comes back online if it has a higher priority than the current AVG. Alternatively, it can enable a new router with a higher priority to take the role of AVG from the current AVG if the new router has a higher AVG.
You would use not the glbp 10 priority 200 command on Router B to change the configuration. You would run this command if you needed Router B to be elected as the AVR instead of Router C, as running this command on Router B would configure it with higher priority than Router C.
Objective:
Infrastructure Services
Sub-Objective:
Configure and verify first-hop redundancy protocols
References:
Cisco > Home > End-of-Sale and End-of-Life Products > Cisco IOS Software Releases > 12.2T > Product Literature > White Papers > GLBP - Gateway Load Balancing Protocol Cisco > Cisco IOS IP Application Services Command Reference > glbp priority

NEW QUESTION # 104
Which two statements are true regarding Cisco ISE? (Choose two.)

A. ISE supports up to 100 Policy Services Nodes
B. ISE can detected endpoints whose addresses have been translated via NAT
C. ISE supports IPv6 downloadable ACLs
D. In two-node standalone ISE deployments, failover must be done manually
E. The number of logs that ISE can retain is determined by your disk space
F. In distributed deployments, failover from primary to secondary Policy Administration Nodes happens automatically

Answer: C,E

NEW QUESTION # 105
Which consideration must be made when designing a Cisco SD-Access fabric underlay?

A. The default MTU should be increased.
B. A unified policy must be used.
C. Up to six control planes are supported.
D. Subnets must be reduced to decrease latency.

Answer: A

Explanation:
Explanation
Look under "Underlay Network Design". Its the second bullet point.
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html#Underlay_Network

NEW QUESTION # 106
Refer to the exhibit.

Refer to the exhibit. An engineer Is designing a redistribution solution for a customer. The customer recently acquired another company and decided to integrate the new network running RlPv1 with the company's existing network. Which redistribution technique must the engineer select to ensure the multipoint two-way redistribution does not cause routing loops?

A. distribute-lists outbound under the RIPv1 process denying EIGRP learned prefixes
B. distribute-lists inbound under the RIPv1 process denying EIGRP learned prefixes
C. distribute-lists outbound under the EIGRP process denying RIPv1 learned prefixes
D. distribute-lists inbound under the EIGRP process denying RIPv1 learned prefixes

Answer: A

NEW QUESTION # 107
......

300-420 Latest Test Sample: https://www.prepawayete.com/Cisco/300-420-practice-exam-dumps.html

2025 Latest PrepAwayETE 300-420 PDF Dumps and 300-420 Exam Engine Free Share: https://drive.google.com/open?id=1QDiXeZy55qNbZj1Pctv9J-HDGU2Y-e3x